CARFOIL. Mirror Cap WrapKit SCHWARZ Carbon

Wrap your mirror caps — no removal

Your mirror caps in carbon black — done yourself, with the same technique and material the pros use. The kit includes everything you need: cast premium foil with up to 7 years durability, professional tools, and access to the video tutorial on carfoil.academy.

Both mirror caps in about 80–120 minutes — explained step by step, with the same tools the pros use.

What's inside?

Everything for both mirror caps. No re-orders needed.

• Pro foil BLACK Carbon (cast, 5–7 years durability) — the same foil pros use. Pre-cut 30×100 cm, enough for both sides.
• DesignLine cutting line (5 m) — replaces the utility knife. No blade ever touches your paint.
• Lil Chizler squeegee + felt cover — the felt cover prevents scratches on the foil; the squeegee itself wraps the foil cleanly around the edges.
• 2× isopropanol cleaning wipe (small) + 2× alcohol wipe — Isopropyl 70% reliably removes grease and wax, the alcohol wipe cleans the edges.
• Slitter cutter — for the tension-frame slit through the release liner.
• Starter card with QR code — direct access to the video tutorial on carfoil.academy.

How much do you actually save?

Source: carfoil.ch guide — Car Wrapping Costs Switzerland (market research 2026, range across Swiss wrap shops and German service installers).

How it works

1. Order — kit ships by mail.
2. Scan QR code — start video tutorial on carfoil.academy.
3. Wrap step by step — 12 clearly explained steps, ca. 40–60 min per side.
4. Done — you got it done and got a first taste of the craft.

Compatibility

The kit is universal and fits all vehicles with painted mirror caps — regardless of brand or model. You do the final cuts yourself, cleanly and millimetre-precise, directly on the car with the included DesignLine cutting line.

On most cars, the mirror cap is the entire painted outer surface of your side mirror — the area in body colour (or black or carbon on sport models). That's exactly what this kit covers, fully. What stays unwrapped is everything around it: the mirror base (where the mirror meets the door), the inner side around the glass, and depending on the model the frame the cap clips into.

Note: the kit is designed for the outer mirror cap. The mirror glass is not removed — no disassembly needed.

Important: The foil only adheres to smooth, painted mirror caps — not to rough or unpainted plastic (e.g. textured mirror housings on some commercial vehicles).

Not sure if your car fits? Send us a photo at info@carfoil.ch.

FAQ

Do I need experience?
Not strictly. The kit is demanding (difficulty 4/5), but the video tutorial walks you through every step. Tip: wrap each side in two pieces — much easier than in one go.

What if I make a mistake?
Within the first minutes the foil can be lifted and repositioned without issue. The DesignLine cutting line ensures no blade ever touches your paint. Worst case: peel off and start over — as long as you have enough foil left. Otherwise re-order foil in the shop.

How long does the foil last?
5–7 years with normal use and care. The manufacturer states a durability of up to 7 years.

Can I remove the foil later?
Yes. Heat the foil and pull slowly — residue-free. Original paint stays intact.

Do I need to remove the mirror?
No. You wrap directly on the mounted mirror. No disassembly.