CARFOIL. PPF and vinyl wet application complete set

Why wet application?

Films without air-release channels bond the moment they touch the surface — after that, nothing can be aligned. Wet, the panel stays movable until it sits right, and trapped air leaves with the squeegee instead of staying underneath as a bubble.

Why gel instead of soapy water?

Soapy water runs off vertical panels, so you keep respraying and are still working against the clock. The gel stays where you sprayed it. You get more time to align, you need less of it, and under the squeegee it thins out and leaves together with the air.

Made for: paint protection film (PPF) and every film without an air-release adhesive.
Not needed for: films with air-release channels — Comply, Easy Apply RS and RapidAir are built for dry application. Window tint only needs a thin application fluid.

A full wrap needs both gels: the standard gel for roof, hood, doors and quarter panels, the Fast Set for mirror caps, bumpers and door handle recesses. Both are in here, along with the tools and the cleaning that comes first.

What's inside

• 1× CARFOIL. PPF Gel 1 L — stays put, squeegees out
• 1× CARFOIL. PPF Gel Fast Set 1 L — holds from the first squeegee pass
• 1× CARFOIL. PPF squeegee (pink)
• 1× CARFOIL. PPF thumb squeegee
• 10× isopropanol wipe 24×20 cm
• 2× trigger sprayer 28/410

How to use

1. Clean and degrease the surface thoroughly.
2. Spray the gel onto the surface and the film adhesive.
3. Lay the film on, align it, work it out from the centre with the squeegee.
4. Squeegee out the remaining moisture and let it flash off.

Wherever you stretch the film — mirror caps, bumpers, door handle recesses — use the Fast Set: stretch it, shape it, then squeegee immediately.

Water-based · silicone-free · mixed in Switzerland