CARFOIL. PPF Gel 1 L – wet application gel for wrap film and PPF

Soapy water runs where you don't need it — and whatever is left has to come back out from under the film. This gel stays put on vertical panels and only thins out under the squeegee. You need less of it, and it comes off more cleanly.

Why wet application?

Films without air-release channels bond the moment they touch the surface — after that, nothing can be aligned. Wet, the panel stays movable until it sits right, and trapped air leaves with the squeegee instead of staying underneath as a bubble.

Why gel instead of soapy water?

Soapy water runs off vertical panels, so you keep respraying and are still working against the clock. The gel stays where you sprayed it. You get more time to align, you need less of it, and under the squeegee it thins out and leaves together with the air.

Made for: paint protection film (PPF) and every film without an air-release adhesive.
Not needed for: films with air-release channels — Comply, Easy Apply RS and RapidAir are built for dry application. Window tint only needs a thin application fluid.

Made for

• Roof, hood, tailgate
• Doors and quarter panels
• Large flat panels

How to use

1. Clean and degrease the surface thoroughly.
2. Spray the gel onto the surface and the film adhesive.
3. Lay the film on, align it, work it out from the centre with the squeegee.
4. Squeegee out the remaining moisture and let it flash off.

Trigger sprayer not included. The bottle ships with a flip-top cap. A metal-free trigger sprayer with a 28/410 thread screws straight onto it and is available separately.

Swirl before use, do not shake.

They belong together: CARFOIL. PPF Gel for the panels, PPF Gel Fast Set for the stretched areas.

1000 ml · water-based · silicone-free · mixed in Switzerland